bumps with lowered altitude!! (lots of great custom bumps!!)

[marz68]

Here's a dent I saw online

http://i131.photobucket.com/albums/p311 ... /22258.jpg

This one is also nice! I belive this one is bagged on ibeams.

[KF100TK]

Finally got my wheels after 3 months on order so now i could post some pictures.
Told you the other truck looks like mine.

[td]

KF100TK,

man you have a great looking truck there! the wheels look killer.
thanks for posting the pics.

[pat67shorty]

How about some specs? Amount of drop, what you did to get it, wheel and tire sizes...?

[texrodder]

just to keep the thread on course here's a very sharp lowered bump.
i believe he is or at least was a member here and i'm thinking i remember seeing this truck on the bay.
so either he had it on there or he bought it there, but none the less its gorgeous.

http://i321.photobucket.com/albums/nn39 ... e_shot.jpg

This almost looks like mine

Love the color,what is it?

[ezernut9mm]

i forget what it's called, but if i remember right that is the original paint, or at least the original color. there was a thread about that truck some time ago...

[td]

yea ezernut,

i remember that thread to, i recall it being rootbeer or something to that effect.

KF100TK,

it almost looks like you have some positive camber in your frontend,unless the pics are just fooling me.i know mine did with the beams and the stock springs, so i cut 1 half out and it looked (to the eye)to be real straight, but then i cut another half round out and it went just a tad neg. anyway around it you have a great looking bump there . i know all about having to wait on wheels myself, took me 4 months to get mine after being told it would be 6 weeks. guess they were running a little behind on yours to hu?

[KF100TK]

Thanks for the compliments.
The specs are 3" aims drop beams stock spring ,rear drop spring bucket couldn't use shackles because of flexamatic springs.
Front wheels 18x7 Foose with 255-45ZR18 rear wheels Foose 18x9 with 285-40ZR18. Bolt pattern 5 on 5.

[427blackpearl]

man that is one truck you got there kf100tk
seems to be a lot more trucks going for the low look latley
it sure would be nice to get all of us together for some pix

[69NVF100]

Thanks for the compliments.
The specs are 3" aims drop beams stock spring ,rear drop spring bucket couldn't use shackles because of flexamatic springs.
Front wheels 18x7 Foose with 255-45ZR18 rear wheels Foose 18x9 with 285-40ZR18. Bolt pattern 5 on 5.

What kind of back spacing did you use. By the way super nice rig.

[KF100TK]

Thanks for the compliments.
The specs are 3" aims drop beams stock spring ,rear drop spring bucket couldn't use shackles because of flexamatic springs.
Front wheels 18x7 Foose with 255-45ZR18 rear wheels Foose 18x9 with 285-40ZR18. Bolt pattern 5 on 5.

What kind of back spacing did you use. By the way super nice rig.

Sorry i don't have that info ,when i ordered them the shop measured everything.
I can get the info later.

[1971ford]

stumbled upon this, thought i would post it here

[ezernut9mm]

Thanks for the compliments.
The specs are 3" aims drop beams stock spring ,rear drop spring bucket couldn't use shackles because of flexamatic springs.
Front wheels 18x7 Foose with 255-45ZR18 rear wheels Foose 18x9 with 285-40ZR18. Bolt pattern 5 on 5.

5 on 5? there's more you're not telling us here.

[Joshpow]

. Tell us the rest.

[KF100TK]

Thanks for the compliments.
The specs are 3" aims drop beams stock spring ,rear drop spring bucket couldn't use shackles because of flexamatic springs.
Front wheels 18x7 Foose with 255-45ZR18 rear wheels Foose 18x9 with 285-40ZR18. Bolt pattern 5 on 5.

5 on 5? there's more you're not telling us here.

Good catch I guess chip did,nt want to make the 5 on 5.5. I had to get new axles and re drill the drums and rotors .
I wanted the 5 on 4.5 but they figured that the hub on our rotors would be to large. This is close as i get to chebby.