I got a mat as a Christmas present and it didn't fit. They took it back and credited me with no problems.
The bad part is that it was for a truck with the larger trans hump. They don't make one for the smaller trans hump and it was a nice looking mat!
Flashback F100s
Moderator: FORDification
- 91Bear
- Blue Oval Fanatic
- Posts: 991
- Joined: Wed Mar 09, 2005 10:31 am
- Location: Texas, San Antonio
-
- New Member
- Posts: 186
- Joined: Sun Aug 29, 2010 6:12 pm
- Location: Thomaston, GA
Re: Flashback F100s
Try NPD (National Parts Depot) - I think they may have them.91Bear wrote:I got a mat as a Christmas present and it didn't fit. They took it back and credited me with no problems.
The bad part is that it was for a truck with the larger trans hump. They don't make one for the smaller trans hump and it was a nice looking mat!
Better Get Into A Ford Son!
- 390Nut
- Blue Oval Guru
- Posts: 1052
- Joined: Sat Oct 16, 2004 1:23 pm
- Location: Fife, WA
Re: Flashback F100s
Why/how did it not fit? Just curious.
Paul
`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"
`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"
-
- New Member
- Posts: 186
- Joined: Sun Aug 29, 2010 6:12 pm
- Location: Thomaston, GA
Re: Flashback F100s
The height of the transmission hump is different depending on which transmission you have. (there are two sizes)390Nut wrote:Why/how did it not fit? Just curious.
Better Get Into A Ford Son!
- Ranchero50
- Moderator
- Posts: 5799
- Joined: Wed Nov 08, 2006 7:02 pm
- Location: Maryland, Hagerstown
- Contact:
Re: Flashback F100s
I would have just gotten the taller cover and bolted it on the hump.
'70 F-350 CS Cummins 6BT 10klb truck 64k mile Bahama Blue
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
Contact me for CNC Dome Lamp Bezels and Ash Tray pulls.
- 91Bear
- Blue Oval Fanatic
- Posts: 991
- Joined: Wed Mar 09, 2005 10:31 am
- Location: Texas, San Antonio