Aux Fuel Tank Molded Hose/cab and bed to frame webbing

[eking66756]

1. 72 F250 with auxillary fuel tank. Need the molded hose between tank and filler neck. It flattens out midway from tank to filler neck. Does anyone have a source for this or if not, another resolution? I have tried fuel resisitant hose but is still cracks over time where it has to be flattended out.
2. Doing a frame-off. This truck did not have any tyoe of "webbing" material between the bed or cab and the frame rail. I see some offered in the various parts catalogs. Has anyone used this and is it needed?
Thanks

[sargentrs]

2. Doing a frame-off. This truck did not have any tyoe of "webbing" material between the bed or cab and the frame rail. I see some offered in the various parts catalogs. Has anyone used this and is it needed?
Thanks

Probably there to lessen any squeaks or rattles but I didn't have anything like it on mine when I pulled both cab and bed.

[hazelnut]

Can't help with the hose, But if you put any type of webbing or material between the bed and frame be sure to run a ground wire so the bed will have a good ground for the tail lights.

[Canonman67]

LMC has your fuel hose, Dennis Carpenter might also.