New horse in the stable

[custom]

1971 ford F-100 Ranger XLT
460
C6 with shift kit and 2500 stall
engine goodies:
Bored .30 over
lunati bracket master II cam
Edelbrock Victor 460 intake
Edelbrock 750 carb
pete jackson gear drive
Dual electric fans
Chrome plated sanderson headers
2 1/2" exhaust with H-pipe
40 series flowmasters
Converted to electronic ignition
MSD Blaster coil
MSD wires
3.50 gears in the rear end
Skinnies in the front and fatties in the rear



Enjoy the pics

[BobbyFord]

Nice truck. Drivetrain is similar to mine. What year is the motor/heads?

[390Nut]

Nice looking truck!

[custom]

engine is out of an 86 F-350 dually, as well as the transmission. just reworked a little by the previous owner. He used the FE engine towers so the engine does not sit right in the engine bay. I have a set of L and L Engine towers for a 385 series engine that should level it out. future plans are to drop my .30 over 1970 429 with DOVE-C heads with a lopey cam and my weind stealth dual high ram tunnel ram with dual 600 cfm holley's on top. cut the hood, and see what it will really do down the track...

[BobbyFord]

engine is out of an 86 F-350 dually, as well as the transmission. just reworked a little by the previous owner. He used the FE engine towers so the engine does not sit right in the engine bay. I have a set of L and L Engine towers for a 385 series engine that should level it out. future plans are to drop my .30 over 1970 429 with DOVE-C heads with a lopey cam and my weind stealth dual high ram tunnel ram with dual 600 cfm holley's on top. cut the hood, and see what it will really do down the track...

Nice! Can't wait to see pics of the swap