Is there a way to tell on the id tag for a dana 60 if it is limited slip or not?? (like the 'L' included on the tag for nine inch center tags)???
Thanks
Dana 60 id tag
Moderators: FORDification, 70_F100
-
snake
- Preferred User
- Posts: 254
- Joined: Fri Sep 30, 2005 12:20 pm
- Location: Eastern Iowa
Dana 60 id tag
"It's better to be hated for who you are than loved for who you're not....." Van Zant
"If you can't say something good then there's nothing good to say...." Big and Rich
"If you can't say something good then there's nothing good to say...." Big and Rich
-
HIO Silver
- 100% FORDified!
- Posts: 1970
- Joined: Sat Jul 23, 2011 11:31 pm
- Location: Devil's Mountain, CA
Re: Dana 60 id tag
Look up the BOM numbers stamped on the axle housing in Dana's applications list on this page: http://www2.dana.com/expertforms/depdf.aspx?prod=AXL
It's the 3rd link (pdf) from the bottom of the page.
It's the 3rd link (pdf) from the bottom of the page.
70 F100 LB 2WD, 360FE, E-Street EFI, TKO-500, 76K original miles.. follow my rebuild: The Lo-Buck Bumpside
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
71 F250 LB, 2WD, 360FE, T18, PS, PB, D60 with 4.11s
73 F100 SB 4WD, 390FE, NP435, +4 on 35s
01 Ferrari 360 Spider F1
01 F150 SuperCrew Lariat 4WD
01 PT Cruiser Limited (DD)
68 Mustang
65 Mustang
-
snake
- Preferred User
- Posts: 254
- Joined: Fri Sep 30, 2005 12:20 pm
- Location: Eastern Iowa
Re: Dana 60 id tag
Thanks for the link - lots of great info there!
"It's better to be hated for who you are than loved for who you're not....." Van Zant
"If you can't say something good then there's nothing good to say...." Big and Rich
"If you can't say something good then there's nothing good to say...." Big and Rich