72 F250 C6 390 Trans Temp and Vacuum Sender Locations

[JPC1972]

I am going to add an electrical Trans temp gauge and Eletrical Vacuum Gauge. Can anyone recommend locations for teh sending units? both are npt 1/8. I was thinking of usint an autometer manifold for the trans temp but i am wondering if there is another way for the C6. The vacuum gauge is also electric so i need to tap into the manifold or find something on the manifold that is available.

[Donnie]

The pan is the most likely place to put your temp sender.....Not the best, but it is the easiest place for install. If you are not racing , or using a hi-stall converter, or plowing snow, or towing a large load, this will be fine
The electric vacuum gauge has caught me off the shelf...........Donnie

[JPC1972]

Thanks for replying Donnie.. I have since learned that the vaccum has an adapter to plug into a vacuum hose.. so I just need to know the best place to attach it... as for the trans temp what do you think of using a manifold between the trans cooler lines? autometer sells one and i am thinking of putting together something with braided stainless hose and a manifold mounted to the apron.. here is the link to the manifold.. http://autometer.com/cat_accessoriesdetail.aspx?vid=165