if anyone has one or know where I could find a new one I would be ever great full to not have to replace the whole axle.Thanks for all your help!
broken drive train
Moderators: FORDification, 70_F100
-
red64
- New Member
- Posts: 1
- Joined: Thu Jun 09, 2016 12:40 pm
broken drive train
the front u joint on the rear drive shaft broke while driving. the drive shaft fell and snapped the spline connection from the axle to the drive shaft... I have looked it up on the tech specs it is part 4209 according to the drawings. I am having absolutely no luck finding said part. if anyone has one or know where I could find a new one I would be ever great full to not have to replace the whole axle.
Thanks for all your help!
if anyone has one or know where I could find a new one I would be ever great full to not have to replace the whole axle.Thanks for all your help!
-
cep62
- 100% FORDified!
- Posts: 2073
- Joined: Sun Oct 26, 2008 8:06 pm
- Location: West Michigan
Re: broken drive train
Welcome to the site .
Are you talking about the yoke that holds the driveshaft to the axle ? that should be easy to find .
Or are you talking the pinion shaft of the axle? that gets more complicated and we need more details ,like the type of axle.
Are you talking about the yoke that holds the driveshaft to the axle ? that should be easy to find .
Or are you talking the pinion shaft of the axle? that gets more complicated and we need more details ,like the type of axle.